Blood Pressure Transducer/Cable Kit
The MLT1199 BP Transducer/Cable Kit comprises an MLT0699 Disposable BP Transducer and a MLAC06 DIN(8) to Spacelabs Adapter Cable for connection to a Bridge Amp.
Operation: Before use, finger-tighten all connections. Blood pressure is transmitted to the sensor via a subject cannula or catheter. Before connecting to a catheter, prime the system by flushing three or four times until all visible air bubbles are removed. Use a 10 mL syringe if continuous flushing is not available. Adjust the 3-way tap to take a zero reading for the transducer before recording blood pressure.
Application: The MLT0699 Disposable Blood Pressure Transducer is designed for measuring arterial and venous blood pressure. For animal use only.
|Amplification Input Amplifier||See product page for complete specifications|
|Body Length English||2.2 in|
|Body Length Metric||57 mm|
|Body Width English||1.5 in|
|Body Width Metric||39 mm|
|Cable Length English||3.9 ft|
|Cable Length Metric||1.2 m|
|Excitation||2 to 10 V DC|
|Input Impedance||350 Ω ±10%|
|MLAC06 Adaptor Cable||8 pin DIN to Spacelabs plug|
|Non linearity and Hysteresis||±2 % of reading or ±1 mmHg (whichever is greater)|
|Operating Life||>500 hours|
|Operating Range||-50 to +300 mmHg|
|Operating Temperature||15° C to 40° C|